Tree Trimming, also known as Tree Removal & Refurbishing and Landscape Engineering is a process that involves the removal of dead or dying branches and other debris from a tree to make space for newer growth. It is basically one of the main parts of tree care, which is essential for tree restoration. The most common types of tree trimming are as follows:
Types of Tree Trimming/Cutting: As the name suggests, Fine Trimming- Removing small dead branches to improve the tree’s look. Standard Trimming: Heavier cutting which usually increases the tree’s circumference. Ladder Trimming: Generally used on large trees that have many branches. Hazardous Trimming: Mostly used in high-risk trees where the removal of large branches poses a hazard. This type of tree trimming is mostly used on trees that are at a height higher than 6 feet.
Types of Tree Pruning/Cutting: There are different types of tree trimming. These include the straight trunk, arborist’s cut, felling, poisoning, wire brushing, and crown pruning. All of these can be broadly divided into two categories. The first category is the straight trunk. Here the branch on which the pruning is done is cut straight through the center of the stem producing a straight stem.
The second category is arborist’s cut. This is also known as a cross-cut or side cut. It is a type of straight trunk tree trimming which removes at least three inches above the branched roots. On the other hand, felling tree trimming involves removing branches that are growing outwards which causes the tree to appear bushy. In addition to this, wire brushing tree trimming involves removing branches that grow close to power lines and telephone wires. Crown pruning is another common type of tree trimming where Tree Service trim the topmost portion of a tree.
When it comes to shrub pruning, the most popular form is box pruning. Here the tree is pruned either by cutting or by removing some or most of its leaves. Shrub pruning is best carried out when the plant is young and when the growth is restricted. However, when the shrub is mature, it is best left in its natural state.
Many people, however, prefer the traditional way of tree pruning, which is tree trimming the entire tree. This is referred to as felling or cutting the tree. In tree trimming, the entire tree is cut down. However, this does not apply to all kinds of shrubs. For instance, the tree pruning method is applicable for evergreens and conifers but it is not recommended for most deciduous trees such as spireas. The growing season for some trees is longer than others and some require more time than others.
Some tree trimming techniques are used to ensure that the tree remains in good health and shape despite the removal of some of its branches. One such technique is called compartmentalization. It is the process of removing only a certain part of a tree, say one-third of the tree, and leaving the remaining parts of the tree intact and unharmed. This ensures that the tree remains healthy even if its branches are removed. By pruning damaged or dead branches, the tree can sometimes survive the removal of the remaining branches.
Tree trimming is an important aspect of tree care, which involves more than simply removing branches. Proper pruning is required to correct the growth pattern, shape, and size of a tree and it also ensures that the tree grows back healthily after it has been cut down. A trained arborist should be consulted for professional advice on tree trimming and removal. Before doing so, make sure to research the topic thoroughly.